Clean in Place Systems

Water Distribution and CIP Skid

Save Water, Increase Production Time and Improve Product Quality

Today's clean-in-place (CIP) systems let you automatically and reliably deliver cleaning solutions and rinse water through your process equipment and piping. This not only saves water and speeds up the cleaning process, it also increases efficiency, improves safety, avoids cross-contamination, and ultimately provides higher assurance of product quality.

Placer Process offers several options for CIP systems to clean and sanitize your process piping, tanks, and equipment. Our two-tank basic model is designed to get your new CIP system up and running quickly. This model offers flow rate options from 40 to 145 gpm to provide sufficient flow and pressure to remove residue and thoroughly rinse piping.

Combine our basic model with many accessories for a total solution that reduces capital cost and CIP operation times. All designs are compliant with FDA, USDA, and 3A standards.

Optionals include:

  • Chemical feed stations
  • Heater assemblies
  • Sterile system
  • Water and chemical recovery

To insure the best return on your investment, let Placer Process provide CIP planning, installation, start-up, and training.

If you already have a CIP system, we can audit it to ensure it is running at peak performance. If your system isn't in optimal condition, we can help you upgrade or replace it.

To purchase or lease a standard or custom clean-in-place system, for a CIP audit or upgrade, or for other process piping solutions, call us toll free at 877-251-6082 or visit www.PlacerProcess.com.

California General Engineering Contractor Class A License 845295
Oregon Commercial: CGC2 General Contractor 2 License 187865
Hawaii General Engineering Contractor Class A License AC-31513
Washington General Contractor license PLACEPS866RC

Consider the Flexibility of a Frame Mounted CIP System

Frame mounted sanitary process and utility systems are fabricated completely off-site and easier to install, creating less interference with your facility operations and productivity.

Focused project management allows us to deliver quality products and offer outstanding technical support throughout each phase of the project, helping to bring your project in on time and on budget.

Benefits of a frame mounted system include:

  • Pre-wired, fully assembled, functionally tested and ready for hook-up so you have less down time
  • Installed quickly, with minimal disruption to your facility
  • All stainless-steel construction
  • Compliant with FDA, USDA, and 3A standards


Standard and Portable Clean-in-Place System

Placer Process Systems, Inc.

(877) 251-6082

www.PlacerProcess.com

We specialize in
problem solving.

On time. On budget.
On task.

© copyright 2015 Placer Process Systems