For a heat transfer system that saves you money, contact us at
1-877-251-6082.
All energy source supply and return components are engineered to precise flow and pressure loss scenarios. Pictured: Class VI steam shut-off (manual and automatic), self-regulated pressure reducing valve, V-ball flow control valve with high turn-down ratio.
System flow and heat transfer requirements are designed to maximize energy transfer responsiveness while minimizing capital investment for key equipment. The vertical multi-stage pump shown above is highly energy efficient while the plate and frame heat exchanger minimizes the space required to achieve maximum heat transfer.
Realty in an industrial plant can be scare, so our team can adapt standard system designs for tight footprints. Sturdy framing and support does not have to be compromised to meet strict layout requirements as displayed above.
Save Money with an Efficient Heat Transfer System Manufactured by Placer Process
Excessive gas and electric operating costs are often attributed to inefficient heat exchanger systems. Placer Process has the wisdom and creative thinking you can use to optimize your heat transfer systems like hot water sets, cooling loops, and energy recovery systems. With a Placer Process engineered heat transfer system you can realize immediate energy savings with minimal capital investment.
Our standard heat transfer systems are designed as follows:
| Energy System Identifier | Designed Energy Transfer Rate* | Closed Loop Circulation Flow | Pair with existing thermal processes, aging utility systems, or our standard CIP Systems listed below |
| Piccolo | 1.5 MMBtu/hr | 100 GPM | 40 GPM CIP Flow |
| Medio | 3.0 MMBtu/hr | 200 GPM | 60 GPM CIP Flow |
| Grande | 4.5 MMBtu/hr | 300 GPM | 100 GPM CIP Flow |
| Enorme | 6.0 MMBtu/hr | 400 GPM | 145 GPM CIP Flow |
| * Assuming 30°F circulation loop temperature difference | |||
Beyond this standard offering, we provide a full range of custom engineered solutions to meet your process requirements and energy savings goals. Our experience is based in sanitary food and beverage environments, but our expertise applies to a range of industrial process equipment such as:
- CIP and COP systems (clean in place and batch washing equipment)
- Pasteurizes and other thermal process systems
- Bottle, pouch, and product coolers
- Indirect heating and cooling loops
- Energy recovery systems
To develop a cost-effective heat transfer system or for more information about heat exchange systems, contact Placer Process at 1-877-251-6082, or send us an email.
|
|
To develop a cost-effective heat transfer system or for more information about heat exchange systems, contact Placer Process at 1-877-251-6082, or send us an email.